-- Network Working Group P. Pate
-- Request for Comments: 3020 B. Lynch
-- Category: Standards Track Overture Networks
-- K. Rehbehn
-- Megisto Systems, Inc.
-- December 2000-- Definitions of Managed Objects
-- for Monitoring and Controlling the
-- UNI/NNI Multilink Frame Relay FunctionFR-MFR-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Integer32,Counter32,
NOTIFICATION-TYPE, transmission
FROM SNMPv2-SMI
TEXTUAL-CONVENTION,TestAndIncr,RowStatusFROM SNMPv2-TC
MODULE-COMPLIANCE,OBJECT-GROUP,NOTIFICATION-GROUPFROM SNMPv2-CONF
SnmpAdminStringFROM SNMP-FRAMEWORK-MIB
InterfaceIndex, ifIndex
FROM IF-MIB;mfrMib MODULE-IDENTITYLAST-UPDATED"200011300000Z"ORGANIZATION"IETF Frame Relay Service MIB (frnetmib)
Working Group"CONTACT-INFO"WG Charter:
http://www.ietf.org/html.charters/frnetmib-charter.html
WG-email: frnetmib@sunroof.eng.sun.com
Subscribe: frnetmib-request@sunroof.eng.sun.com
Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib
Chair: Andy Malis
Vivace Networks
Email: Andy.Malis@vivacenetworks.com
WG editor: Prayson Pate
Overture Networks
Email: prayson.pate@overturenetworks.com
Co-author: Bob Lynch
Overture Networks
EMail: bob.lynch@overturenetworks.com
Co-author: Kenneth Rehbehn
Megisto Systems, Inc.
EMail: krehbehn@megisto.com"DESCRIPTION"This is the MIB used to control and monitor the multilink
frame relay (MFR) function described in FRF.16."-- ----------------------------------------------------------- ----------------------------------------------------------- Revision History-- ----------------------------------------------------------- ---------------------------------------------------------REVISION"200011300000Z"DESCRIPTION"Published as RFC 3020."::={ transmission 47}-- ----------------------------------------------------------- ---------------------------------------------------------
-- Textual Conventions-- ----------------------------------------------------------- ---------------------------------------------------------MfrBundleLinkState::=TEXTUAL-CONVENTIONSTATUScurrentDESCRIPTION"The possible states for a bundle link, as defined in
Annex A of FRF.16."REFERENCE"FRF.16 Annex A"SYNTAXINTEGER{mfrBundleLinkStateAddSent (1),mfrBundleLinkStateAddRx (2),mfrBundleLinkStateAddAckRx (3),mfrBundleLinkStateUp (4),mfrBundleLinkStateIdlePending (5),mfrBundleLinkStateIdle (6),
mfrBundleLinkStateDown (7),mfrBundleLinkStateDownIdle (8)}-- ----------------------------------------------------------- ----------------------------------------------------------- Object Identifiers-- ----------------------------------------------------------- ---------------------------------------------------------mfrMibScalarObjects OBJECTIDENTIFIER::={ mfrMib 1}mfrMibBundleObjects OBJECTIDENTIFIER::={ mfrMib 2}mfrMibBundleLinkObjects OBJECTIDENTIFIER::={ mfrMib 3}mfrMibTraps OBJECTIDENTIFIER::={ mfrMib 4}
mfrMibConformance OBJECTIDENTIFIER::={ mfrMib 5}mfrMibTrapsPrefix OBJECTIDENTIFIER::={ mfrMibTraps 0}mfrMibGroups OBJECTIDENTIFIER::={ mfrMibConformance 1}mfrMibCompliances OBJECTIDENTIFIER::={ mfrMibConformance 2}-- ----------------------------------------------------------- ----------------------------------------------------------- Scalars-- ----------------------------------------------------------- ---------------------------------------------------------mfrBundleMaxNumBundles OBJECT-TYPESYNTAXInteger32
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"This object is used to inform the manager of the
maximum number of bundles supported by this device."::={ mfrMibScalarObjects 1}mfrBundleNextIndex OBJECT-TYPESYNTAXTestAndIncrMAX-ACCESSread-writeSTATUScurrentDESCRIPTION"This object is used to assist the manager in
selecting a value for mfrBundleIndex during row creation
in the mfrBundleTable. It can also be used to avoid race
conditions with multiple managers trying to create
rows in the table (see RFC 2494 [RFC2494] for one such
alogrithm)."REFERENCE"RFC 2494"::={ mfrMibScalarObjects 2}-- ----------------------------------------------------------- ---------------------------------------------------------
-- Bundle Table-- ----------------------------------------------------------- ---------------------------------------------------------mfrBundleTable OBJECT-TYPESYNTAXSEQUENCEOF MfrBundleEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"The bundle configuration and status table. There
is a one-to-one correspondence between a bundle
and an interface represented in the ifTable.
The following objects of the ifTable have specific
meaning for an MFR bundle:
ifAdminStatus - the bundle admin status
ifOperStatus - the bundle operational status
ifSpeed - the current bandwidth of the bundle
ifInUcastPkts - the number of frames received
on the bundle
ifOutUcastPkts - the number of frames transmitted
on the bundle
ifInErrors - frame (not fragment) errors
ifOutErrors - frame (not fragment) errors
"::={ mfrMibBundleObjects 3}
mfrBundleEntry OBJECT-TYPESYNTAX MfrBundleEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"An entry in the bundle table."INDEX{ mfrBundleIndex }::={ mfrBundleTable 1}
MfrBundleEntry ::=SEQUENCE{
mfrBundleIndex
Integer32,
mfrBundleIfIndex
InterfaceIndex,
mfrBundleRowStatus
RowStatus,
mfrBundleNearEndName
SnmpAdminString,
mfrBundleFragmentation
INTEGER,
mfrBundleMaxFragSize
Integer32,
mfrBundleTimerHello
INTEGER,
mfrBundleTimerAck
INTEGER,
mfrBundleCountMaxRetry
INTEGER,
mfrBundleActivationClass
INTEGER,
mfrBundleThreshold
Integer32,
mfrBundleMaxDiffDelay
Integer32,
mfrBundleSeqNumSize
INTEGER,
mfrBundleMaxBundleLinks
Integer32,
mfrBundleLinksConfigured
Integer32,
mfrBundleLinksActive
Integer32,
mfrBundleBandwidth
Integer32,
mfrBundleFarEndName
SnmpAdminString,
mfrBundleResequencingErrors
Counter32}mfrBundleIndex OBJECT-TYPESYNTAXInteger32(1..2147483647)MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The index into the table. While this corresponds
to an entry in the ifTable, the value of mfrBundleIndex
need not match that of the ifIndex in the ifTable.
A manager can use mfrBundleNextIndex to select a unique
mfrBundleIndex for creating a new row."::={ mfrBundleEntry 1}mfrBundleIfIndex OBJECT-TYPESYNTAXInterfaceIndexMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The value must match an entry in the interface
table whose ifType must be set to frf16MfrBundle(163).
For example: if the value of mfrBundleIfIndex is 10,
then a corresponding entry should be present in
the ifTable with an index of 10 and an ifType of 163."::={ mfrBundleEntry 2}mfrBundleRowStatus OBJECT-TYPESYNTAXRowStatus
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The mfrBundleRowStatus object allows create, change,
and delete operations on bundle entries."REFERENCE"RFC 1903"::={ mfrBundleEntry 3}mfrBundleNearEndName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The configured name of the bundle."REFERENCE"FRF.16 section 3.4.1"::={ mfrBundleEntry 4}mfrBundleFragmentation OBJECT-TYPESYNTAXINTEGER{enable (1),disable (2)
}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Controls whether the bundle performs/accepts
fragmentation and re-assembly. The possible
values are:
enable(1) - Bundle links will fragment frames
disable(2) - Bundle links will not fragment
frames."DEFVAL{ disable }::={ mfrBundleEntry 5}mfrBundleMaxFragSize OBJECT-TYPESYNTAXInteger32(-1..8184)UNITS"Octets"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The maximum fragment size supported. Note that this
is only valid if mfrBundleFragmentation is set to enable(1).
Zero is not a valid fragment size.
A bundle that does not support fragmentation must return
this object with a value of -1."DEFVAL{-1}::={ mfrBundleEntry 6}mfrBundleTimerHello OBJECT-TYPESYNTAXINTEGER(1..180)UNITS"Seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The configured MFR Hello Timer value."REFERENCE"FRF.16 section 4.3.8.1"DEFVAL{10}::={ mfrBundleEntry 7}mfrBundleTimerAck OBJECT-TYPESYNTAXINTEGER(1..10)
UNITS"Seconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The configured MFR T_ACK value."REFERENCE"FRF.16 section 4.3.8.2"DEFVAL{4}::={ mfrBundleEntry 8}mfrBundleCountMaxRetry OBJECT-TYPESYNTAXINTEGER(1..5)MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The MFR N_MAX_RETRY value."REFERENCE"FRF.16 section 4.3.8.3"DEFVAL{2}::={ mfrBundleEntry 9}
mfrBundleActivationClass OBJECT-TYPESYNTAXINTEGER{mfrBundleActivationClassA (1),mfrBundleActivationClassB (2),mfrBundleActivationClassC (3),mfrBundleActivationClassD (4)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Controls the conditions under which the bundle is activated.
The following settings are available:
mfrBundleActivationClassA(1) - at least one must link up
mfrBundleActivationClassB(2) - all links must be up
mfrBundleActivationClassC(3) - a certain number must be
up. Refer to
mfrBundleThreshold for
the required number.
mfrBundleActivationClassD(4) - custom (implementation
specific)."REFERENCE"FRF.16 section 4.2.2.1"DEFVAL{ mfrBundleActivationClassA }::={ mfrBundleEntry 10}mfrBundleThreshold OBJECT-TYPESYNTAXInteger32(-1..2147483647)UNITS"Bundle Links"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Specifies the number of links that must be in operational
'up' state before the bundle will transition to an
operational up/active state. If the number of
operational 'up' links falls below this value,
then the bundle will transition to an inactive
state.
Note - this is only valid when mfrBundleActivationClass
is set to mfrBundleActivationClassC or, depending upon the
implementation, to mfrBundleActivationClassD. A bundle that
is not set to one of these must return this object with a
value of -1."REFERENCE"FRF.16 section 4.2.2.1"DEFVAL{-1}::={ mfrBundleEntry 11}mfrBundleMaxDiffDelay OBJECT-TYPESYNTAXInteger32(-1..2147483647)UNITS"Milliseconds"MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The maximum delay difference between the bundle
links.
A value of -1 indicates that this object does not contain
a valid value"DEFVAL{-1}::={ mfrBundleEntry 12}mfrBundleSeqNumSize OBJECT-TYPE
SYNTAXINTEGER{seqNumSize12bit (1),seqNumSize24bit (2)}MAX-ACCESSread-createSTATUScurrentDESCRIPTION"Controls whether the standard FRF.12 12-bit
sequence number is used or the optional 24-bit
sequence number."REFERENCE"FRFTC/99-194"DEFVAL{ seqNumSize12bit }::={ mfrBundleEntry 13}mfrBundleMaxBundleLinks OBJECT-TYPESYNTAXInteger32(1..2147483647)UNITS"Bundle Links"MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The maximum number of bundle links supported for
this bundle."::={ mfrBundleEntry 14}mfrBundleLinksConfigured OBJECT-TYPESYNTAXInteger32(1..2147483647)UNITS"Bundle Links"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of links configured for the bundle."::={ mfrBundleEntry 15}mfrBundleLinksActive OBJECT-TYPESYNTAXInteger32(-1..2147483647)UNITS"Bundle Links"MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The number of links that are active."::={ mfrBundleEntry 16}mfrBundleBandwidth OBJECT-TYPESYNTAXInteger32UNITS"Bits/Sec"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The amount of available bandwidth on the bundle"::={ mfrBundleEntry 17}mfrBundleFarEndName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Name of the bundle received from the far end."REFERENCE"FRF.16 section 3.4.1"::={ mfrBundleEntry 18}
mfrBundleResequencingErrors OBJECT-TYPESYNTAXCounter32UNITS"Error Events"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"A count of the number of resequencing errors. Each event
may correspond to multiple lost frames. Example:
Say sequence number 56, 59 and 60 is received for DLCI 100.
It is decided by some means that sequence 57 and 58 is lost.
This counter should then be incremented by ONE, even though
two frames were lost."::={ mfrBundleEntry 19}-- ----------------------------------------------------------- ----------------------------------------------------------- ifIndex Mapping to Bundle Index Table-- ----------------------------------------------------------- ---------------------------------------------------------mfrBundleIfIndexMappingTable OBJECT-TYPESYNTAXSEQUENCEOF MfrBundleIfIndexMappingEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A table mapping the values of ifIndex to the
mfrBundleIndex. This is required in order to find
the mfrBundleIndex given an ifIndex. The mapping of
mfrBundleIndex to ifIndex is provided by the
mfrBundleIfIndex entry in the mfrBundleTable."::={ mfrMibBundleObjects 4}mfrBundleIfIndexMappingEntry OBJECT-TYPESYNTAX MfrBundleIfIndexMappingEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"Each row describes one ifIndex to mfrBundleIndex mapping."INDEX{ ifIndex }::={ mfrBundleIfIndexMappingTable 1}
MfrBundleIfIndexMappingEntry ::=SEQUENCE{
mfrBundleIfIndexMappingIndex
Integer32}mfrBundleIfIndexMappingIndex OBJECT-TYPESYNTAXInteger32(1..2147483647)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The mfrBundleIndex of the given ifIndex."::={ mfrBundleIfIndexMappingEntry 2}-- ----------------------------------------------------------- ----------------------------------------------------------- Bundle Link Table-- ----------------------------------------------------------- ---------------------------------------------------------mfrBundleLinkTable OBJECT-TYPESYNTAXSEQUENCEOF MfrBundleLinkEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"The bundle link configuration and status table. There
is a one-to-one correspondence between a bundle link
and a physical interface represented in the ifTable. The
ifIndex of the physical interface is used to index the
bundle link table, and to create rows.
The following objects of the ifTable have specific
meaning for an MFR bundle link:
ifAdminStatus - the bundle link admin status
ifOperStatus - the bundle link operational
status
ifSpeed - the bandwidth of the bundle
link interface
ifInUcastPkts - the number of frames received
on the bundle link
ifOutUcastPkts - the number of frames transmitted
on the bundle link
ifInErrors - frame and fragment errors
ifOutErrors - frame and fragment errors"::={ mfrMibBundleLinkObjects 1}mfrBundleLinkEntry OBJECT-TYPESYNTAX MfrBundleLinkEntry
MAX-ACCESSnot-accessibleSTATUScurrent
DESCRIPTION"An entry in the bundle link table."INDEX{ ifIndex }::={ mfrBundleLinkTable 1}
MfrBundleLinkEntry ::=SEQUENCE{
mfrBundleLinkRowStatus
RowStatus,
mfrBundleLinkConfigBundleIndex
Integer32,
mfrBundleLinkNearEndName
SnmpAdminString,
mfrBundleLinkState
MfrBundleLinkState,
mfrBundleLinkFarEndName
SnmpAdminString,
mfrBundleLinkFarEndBundleName
SnmpAdminString,
mfrBundleLinkDelay
Integer32,
mfrBundleLinkFramesControlTx
Counter32,
mfrBundleLinkFramesControlRx
Counter32,
mfrBundleLinkFramesControlInvalid
Counter32,
mfrBundleLinkTimerExpiredCount
Counter32,
mfrBundleLinkLoopbackSuspected
Counter32,
mfrBundleLinkUnexpectedSequence
Counter32,
mfrBundleLinkMismatch
Counter32}mfrBundleLinkRowStatus OBJECT-TYPESYNTAXRowStatusMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The mfrBundleLinkRowStatus object allows create, change,
and delete operations on mfrBundleLink entries.
The create operation must fail if no physical interface
is associated with the bundle link."::={ mfrBundleLinkEntry 1}mfrBundleLinkConfigBundleIndex OBJECT-TYPESYNTAXInteger32(1..2147483647)
MAX-ACCESSread-createSTATUScurrentDESCRIPTION"The mfrBundleLinkConfigBundleIndex object allows
the manager to control the bundle to which the bundle
link is assigned. If no value were in this field, then
the bundle would remain in NOT_READY rowStatus and be
unable to go to active. With an appropriate mfrBundleIndex
in this field, then we could put the mfrBundleLink row in
NOT_IN_SERVICE or ACTIVE rowStatus."::={ mfrBundleLinkEntry 2}mfrBundleLinkNearEndName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-createSTATUScurrentDESCRIPTION"The configured bundle link name that is sent to the far end."::={ mfrBundleLinkEntry 3}mfrBundleLinkState OBJECT-TYPESYNTAXMfrBundleLinkState
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Current bundle link state as defined by the MFR protocol
described in Annex A of FRF.16."REFERENCE"FRF.16 Annex A"::={ mfrBundleLinkEntry 4}mfrBundleLinkFarEndName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Name of bundle link received from far end."REFERENCE"FRF.16 section 3.4.2"::={ mfrBundleLinkEntry 5}mfrBundleLinkFarEndBundleName OBJECT-TYPESYNTAXSnmpAdminStringMAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"Name of far end bundle for this link received from far end."REFERENCE"FRF.16 section 3.4.1"::={ mfrBundleLinkEntry 6}mfrBundleLinkDelay OBJECT-TYPESYNTAXInteger32(-1..2147483647)UNITS"Milliseconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Current round-trip delay for this bundle link. The
value -1 is returned when an implementation does not
support measurement of the bundle link delay."REFERENCE"FRF.16 section 3.4.4"::={ mfrBundleLinkEntry 7}mfrBundleLinkFramesControlTx OBJECT-TYPESYNTAXCounter32UNITS"Frames"
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of MFR control frames sent."REFERENCE"FRF.16 section 3.2"::={ mfrBundleLinkEntry 8}mfrBundleLinkFramesControlRx OBJECT-TYPESYNTAXCounter32UNITS"Frames"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of valid MFR control frames received."REFERENCE"FRF.16 section 3.2"::={ mfrBundleLinkEntry 9}mfrBundleLinkFramesControlInvalid OBJECT-TYPESYNTAXCounter32UNITS"Frames"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The number of invalid MFR control frames received."REFERENCE"FRF.16 section 3.2"::={ mfrBundleLinkEntry 10}mfrBundleLinkTimerExpiredCount OBJECT-TYPESYNTAXCounter32UNITS"Timer Expiration Events"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"Number of times the T_HELLO or T_ACK timers expired."REFERENCE"FRF.16 section 4.3.8.1 and 4.3.8.2"::={ mfrBundleLinkEntry 11}mfrBundleLinkLoopbackSuspected OBJECT-TYPESYNTAXCounter32UNITS"Loopback Suspected Events"MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The number of times a loopback has been suspected
(based upon the use of magic numbers)."REFERENCE"FRF.16 section 4.3.7"::={ mfrBundleLinkEntry 12}mfrBundleLinkUnexpectedSequence OBJECT-TYPESYNTAXCounter32UNITS"Frames"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of data MFR frames discarded because the sequence
number of the frame for a DLCI was less than (delayed frame)
or equal to (duplicate frame) the one expected for that DLCI.
Example:
Say frames with sequence numbers 56, 58, 59 is received for
DLCI 100. While waiting for sequence number 57 another frame
with sequence number 58 arrives. Frame 58 is discarded and
the counter is incremented."REFERENCE"FRF.16 section 4.2.3.2"::={ mfrBundleLinkEntry 13}
mfrBundleLinkMismatch OBJECT-TYPESYNTAXCounter32UNITS"Bundle Name Mismatch Events"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times that the unit has been notified by the
remote peer that the bundle name is inconsistent with other
bundle links attached to the far-end bundle."REFERENCE"FRF.16 section 4.3.2.4"::={ mfrBundleLinkEntry 14}-- ----------------------------------------------------------- ----------------------------------------------------------- Notifications/Traps-- ----------------------------------------------------------- ---------------------------------------------------------mfrMibTrapBundleLinkMismatch NOTIFICATION-TYPEOBJECTS{
mfrBundleNearEndName,
mfrBundleFarEndName,
mfrBundleLinkNearEndName,
mfrBundleLinkFarEndName,
mfrBundleLinkFarEndBundleName
}STATUScurrentDESCRIPTION"This trap indicates that a bundle link mismatch has
been detected. The following objects are reported:
mfrBundleNearEndName: configured name of near end bundle
mfrBundleFarEndName: previously reported name of
far end bundle
mfrBundleLinkNearEndName: configured name of near end bundle
mfrBundleLinkFarEndName: reported name of far end bundle
mfrBundleLinkFarEndBundleName: currently reported name of
far end bundle
Note: that the configured items may have been configured
automatically.
Note: The mfrBundleLinkMismatch counter is incremented when
the trap is sent."REFERENCE"FRF.16 section 4.3.2.4"::={ mfrMibTrapsPrefix 1}-- ---------------------------------------------------------
-- ----------------------------------------------------------- Conformance/Compliance-- ----------------------------------------------------------- ---------------------------------------------------------mfrMibCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for equipment that implements
the FRF16 MIB. All of the current groups are mandatory,
but a number of objects may be read-only if the
implementation does not allow configuration."MODULE-- this moduleMANDATORY-GROUPS{
mfrMibBundleGroup,
mfrMibBundleLinkGroup,
mfrMibTrapGroup
}OBJECT mfrBundleFragmentation
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required, but the value used must be
reported."OBJECT mfrBundleMaxFragSize
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required, but the value used must be
reported.
A value of -1 indicates that the value is not applicable."OBJECT mfrBundleThreshold
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required, but the value used must be
reported.
A value of -1 indicates that the value is not applicable."OBJECT mfrBundleMaxDiffDelay
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required, but the value used must be
reported."OBJECT mfrBundleSeqNumSize
MIN-ACCESSread-onlyDESCRIPTION"Write access is not required, but the value used must be
reported.
A value of -1 indicates that the value is not applicable."::={ mfrMibCompliances 1}-- ---------------------------------------------------------
-- ----------------------------------------------------------- Units of Conformance-- ----------------------------------------------------------- ---------------------------------------------------------mfrMibBundleGroup OBJECT-GROUPOBJECTS{
mfrBundleMaxNumBundles,
mfrBundleNextIndex,
mfrBundleIfIndex,
mfrBundleRowStatus,
mfrBundleNearEndName,
mfrBundleFragmentation,
mfrBundleMaxFragSize,
mfrBundleTimerHello,
mfrBundleTimerAck,
mfrBundleCountMaxRetry,
mfrBundleActivationClass,
mfrBundleThreshold,
mfrBundleMaxDiffDelay,
mfrBundleMaxBundleLinks,
mfrBundleLinksConfigured,
mfrBundleLinksActive,
mfrBundleBandwidth,
mfrBundleSeqNumSize,
mfrBundleFarEndName,
mfrBundleResequencingErrors,
mfrBundleIfIndexMappingIndex
}STATUScurrentDESCRIPTION"Group of objects describing bundles."::={ mfrMibGroups 1}mfrMibBundleLinkGroup OBJECT-GROUPOBJECTS{
mfrBundleLinkRowStatus,
mfrBundleLinkConfigBundleIndex,
mfrBundleLinkNearEndName,
mfrBundleLinkState,
mfrBundleLinkFarEndName,
mfrBundleLinkFarEndBundleName,
mfrBundleLinkDelay,
mfrBundleLinkFramesControlTx,
mfrBundleLinkFramesControlRx,
mfrBundleLinkFramesControlInvalid,
mfrBundleLinkTimerExpiredCount,
mfrBundleLinkLoopbackSuspected,
mfrBundleLinkUnexpectedSequence,
mfrBundleLinkMismatch
}STATUScurrent
DESCRIPTION"Group of objects describing bundle links."::={ mfrMibGroups 2}mfrMibTrapGroup NOTIFICATION-GROUPNOTIFICATIONS{
mfrMibTrapBundleLinkMismatch
}STATUScurrentDESCRIPTION"Group of objects describing notifications (traps)."::={ mfrMibGroups 3}END